material testing machines
Pressure testing machine type ALPHA 2-4000 (Form+Test)
Our testing machine corresponds to accuracy class 1 according to DIN EN ISO 7500-1 and DIN EN 12390-4.
It has a stable 4-column load frame in which the machine base and head are made of solid material.
General technical data:
– Compressive force max. 4000kN
– Piston stroke 100 mm
– Measuring range 80 to 4000 kN
– Display range 0 to 4000 kN
The force is measured electronically using a liquid pressure sensor.
The control of the testing machine is guaranteed by the drive station type AS-C20-N.
The digital measurement and control electronics DIGIMAXX ® C-20 are integrated in this drive station.
The built-in servo valve ensures a constant increase in load, adjustable as a ramp function between 0.001 – 100 kN/s.
Additional test inserts or devices:
– Gap testing device type DV 500 S
– Electronic linear extensometer type LD-DD1-2 for determining the modulus of elasticity
material testing machines
Bend testing machine type DELTA 5-300 S (Form+Test)
Our testing machine corresponds to accuracy class 1 according to DIN EN ISO 7500-1. It has a stable
closed 4-column machine frame. The machine base and head are bolted to the columns without play.
Our testing machine is a reinforced version with high frame rigidity
and thus meets the requirements of the DAfStb guideline “Steel fiber concrete” edition 2012, for the testing of steel fiber concrete beams.
General technical data:
– test force max. 300kN
– Piston stroke 220 mm
– Measuring range 3 to 300 kN
– Display range 0 to 300 kN
The force is measured via an electronic device that is built in at the top and is not sensitive to lateral forces
load cell. The control of the testing machine is guaranteed by the drive station type AS-C20-N. The digital measurement and control electronics DIGIMAXX C-20 are integrated in this drive station. The built-in servo valve ensures a constant increase in load, adjustable as a ramp function between 0.001 – 100 kN/s.
Additional test inserts or devices:
– Use for 3 and 4-point loading
– Equipment for deflection measurement type LD-GTX-2
material testing machines
Water penetration testing system type WU 3-B
Our water penetration testing system meets the requirements of DIN EN 12390 Part 8
and can be used to test 3 specimens at the same time.
It is based on a patented design with automatic sample clamping and quantitative water measurement.
WU plates and 15 or 20 cubes can be clamped into the system.
The working pressure can be infinitely adjusted from 0.5 to 10 bar and is displayed on a pressure gauge with accuracy class 2.5.
The individual test points can be operated separately.
Accesories:
– Water pressure plate insert
– External pressure gauge to check the internal pressure gauge
– Compressor
list of our
material testing devices
- Proceq DY-216 Adhesion Tester
- rebound hammer
- HILTI core drill DD 150-U
- Test device for determining the modulus of elasticity
- Lightweight Deflectometer ZFG 3.0
- Electronic digital plate pressure device AX01
- Profometer 5+ Rebar Locator, Scanlog model
- Microscope with camera and scanning table
- Laboratory screening machine THB 400
- photometer